From OpenHome

(Difference between revisions)
Jump to: navigation, search
(Volume Service Description (XML))
(added documentation for state variables)
 
(5 intermediate revisions not shown)
Line 9: Line 9:
==Balance==
==Balance==
-
Balance is an adjustable setting that specifies the '''bias''' in volume between the '''left and right''' output channels of the product. Balance can be set to an absolute value or incremented/decremented in single steps. The maximum Balance setting is defined by the '''BalanceMax''' Characteristic. The minimum Balance setting is defined by ('''-BalanceMax''') .
+
Balance is an adjustable setting that specifies the '''bias''' in volume between the '''left and right''' output channels of the product. Balance can be set to an absolute value or incremented/decremented in single steps. The maximum Balance setting is defined by the '''BalanceMax''' Characteristic. The minimum Balance setting is defined by ('''-BalanceMax''').
 +
 
 +
A setting of zero results in neutral balance (i.e. no bias applied) between left and right output channels.  Negative values amplify left and attenuate right output channels.  Conversely, positive values attenuate left and amplify right output channels.  Increasing absolute values result in progressively larger amplification/attenuation being applied to output channels in this asymmetric manner.  At or near the maximum settings, the attenuated channels may ended up being effectively reduced to volume zero.
==Fade==
==Fade==
Line 17: Line 19:
Mute is an adjustable state that determines if the output channels of the product are muted or not. When muted, all output channels of the product are silent.
Mute is an adjustable state that determines if the output channels of the product are muted or not. When muted, all output channels of the product are silent.
 +
==Characteristics==
 +
Each product has six read-only values that define value ranges and their granularity -- as well as notable values within these ranges -- for volume, balance, and fade.
-
==Characterstics==
 
-
Each product has '''six''' read only values that define its volume Characteristics.
 
====VolumeMax====
====VolumeMax====
VolumeMax defines the absolute maximum Volume setting.
VolumeMax defines the absolute maximum Volume setting.
====VolumeUnity====
====VolumeUnity====
-
VolumeUnity defines the value of Volume that will result in unity system gain (ie ''output amplitude'' = ''input amplitude'').
+
VolumeUnity defines the value of Volume that will result in unity system gain (i.e. ''output amplitude'' = ''input amplitude'').
====VolumeSteps====
====VolumeSteps====
VolumeSteps defines the number of step increments required to increase the Volume from zero to VolumeMax.
VolumeSteps defines the number of step increments required to increase the Volume from zero to VolumeMax.
 +
====VolumeMilliDbPerStep====
====VolumeMilliDbPerStep====
-
VolumeMilliDbPerStep defines the size of each volume step in '''binary milli decibels''' (bmdB). [''1024bmdB = 1dB'']
+
VolumeMilliDbPerStep defines the size of each volume step in '''binary milli decibels''' (mibi dB). [''1024mibi dB = 1dB'']
====BalanceMax====
====BalanceMax====
-
BalanceMax defines the maximum Balance setting. The minimum Balance setting is (-BalanceMax)
+
BalanceMax defines the maximum Balance setting. The minimum Balance setting is (-BalanceMax).
 +
 
====FadeMax====
====FadeMax====
-
FadeMax defines the maximum Fade setting. The minimum Fade setting is (-FadeMax)
+
FadeMax defines the maximum Fade setting. The minimum Fade setting is (-FadeMax).
Line 62: Line 66:
=== Fade ===
=== Fade ===
The Fade action reports the current Fade setting of the product.
The Fade action reports the current Fade setting of the product.
-
==== SetFade ====
+
=== SetFade ===
The SetFade action provides a means of setting the Fade to a specific value.
The SetFade action provides a means of setting the Fade to a specific value.
=== FadeInc===
=== FadeInc===
Line 75: Line 79:
=== Characteristics ===
=== Characteristics ===
-
The Characteristics action returns all '''six''' characteristic values of the product.
+
The Characteristics action returns all six characteristic values of the product.
 +
 
 +
 
 +
= State Variables =
 +
 
 +
== Volume ==
 +
the current user volume setting, i.e. an integer value in the range [0..VolumeLimit]
 +
 
 +
== Mute ==
 +
the boolean setting indicating whether all output channels are currently forced to zero volume
 +
 
 +
== Balance ==
 +
the current setting of bias between left and right output channels, i.e. an integer value in the range [-BalanceMax..+BalanceMax]
 +
 
 +
== Fade ==
 +
the current setting of bias between front and back output channels, i.e. an integer value in the range [-FadeMax..+FadeMax]
 +
 
 +
== VolumeLimit ==
 +
the user-imposed (soft) maximum volume setting, i.e. an integer in the range [0..VolumeMax]; read-only
 +
 
 +
== VolumeMax ==
 +
the system-imposed (hard) maximum volume setting; read-only
 +
 
 +
== VolumeUnity ==
 +
the system-specific volume setting that results in the input signal amplitude equalling the output signal amplitude (0dB gain), i.e. an integer in the range [0..VolumeMax]; read-only
 +
 
 +
== VolumeSteps ==
 +
the system-specific number of user-visible volume steps that would increase the volume from zero to VolumeMax; read-only
 +
 
 +
== VolumeMilliDbPerStep ==
 +
the system-specific gain increase with each volume step in binary milli decibel (mibi dB); read-only
 +
 
 +
== BalanceMax ==
 +
the system-specific balance value that leads to maximum bias towards the right between output channels;  read-only
 +
 
 +
== FadeMax ==
 +
the system-specific fade value that leads to maximum bias towards the rear between output channels;  read-only
= Technical Details =
= Technical Details =
Line 85: Line 125:
== Volume Service Description (XML) ==
== Volume Service Description (XML) ==
-
<code>
+
<syntaxhighlight lang="xml">
<?xml version="1.0" encoding="utf-8"?>
<?xml version="1.0" encoding="utf-8"?>
<scpd xmlns="urn:schemas-upnp-org:service-1-0">
<scpd xmlns="urn:schemas-upnp-org:service-1-0">
Line 285: Line 325:
   </serviceStateTable>
   </serviceStateTable>
</scpd>
</scpd>
-
</code>
+
</syntaxhighlight>

Latest revision as of 15:24, 9 August 2013

Contents

Architecture Overview

The Volume Service provides a means of controlling various settings which affect the product's volume (signal amplitude) measured at the output channels. A product may have one or more output channels. Balance or Fade settings may result in different volumes at each output. In the Mute state, all output channels are reduced to zero volume.

Volume

Volume is an adjustable setting that controls the loudness of the audio at the output channels of the product. Volume can be set to an absolute value or incremented/decremented in single steps. The maximum Volume setting is defined by the current value of VolumeLimit. The minimum Volume setting is zero. If an attempt is made to set the Volume above VolumeLimit, the Volume will be set to the VolumLimit. If an attempt is made to set the Volume above VolumeMax, an error will be reported.

Volume Limit

VolumeLimit specifies the upper limit of the Volume. Any attempt to set Volume above the VolumeLimit will reset Volume to the value of VolumeLimit. If VolumeLimit is changed, Volume is checked and automatically reduced if necessary. The maximum VolumeLimit setting is defined by the VolumeMax Characteristic.

Balance

Balance is an adjustable setting that specifies the bias in volume between the left and right output channels of the product. Balance can be set to an absolute value or incremented/decremented in single steps. The maximum Balance setting is defined by the BalanceMax Characteristic. The minimum Balance setting is defined by (-BalanceMax).

A setting of zero results in neutral balance (i.e. no bias applied) between left and right output channels. Negative values amplify left and attenuate right output channels. Conversely, positive values attenuate left and amplify right output channels. Increasing absolute values result in progressively larger amplification/attenuation being applied to output channels in this asymmetric manner. At or near the maximum settings, the attenuated channels may ended up being effectively reduced to volume zero.

Fade

Fade is an adjustable setting that specifies the bias in volume between the front and rear output channels of the products. Fade can be set to an absolute value or incremented/decremented in single steps. The maximum Fade setting is defined by the FadeMax Characteristic. The minimum Fade setting is defined by (-FadeMax) .

Mute

Mute is an adjustable state that determines if the output channels of the product are muted or not. When muted, all output channels of the product are silent.

Characteristics

Each product has six read-only values that define value ranges and their granularity -- as well as notable values within these ranges -- for volume, balance, and fade.

VolumeMax

VolumeMax defines the absolute maximum Volume setting.

VolumeUnity

VolumeUnity defines the value of Volume that will result in unity system gain (i.e. output amplitude = input amplitude).

VolumeSteps

VolumeSteps defines the number of step increments required to increase the Volume from zero to VolumeMax.

VolumeMilliDbPerStep

VolumeMilliDbPerStep defines the size of each volume step in binary milli decibels (mibi dB). [1024mibi dB = 1dB]

BalanceMax

BalanceMax defines the maximum Balance setting. The minimum Balance setting is (-BalanceMax).

FadeMax

FadeMax defines the maximum Fade setting. The minimum Fade setting is (-FadeMax).


Actions

Volume

The Volume action reports the current Volume setting.

SetVolume

The SetVolume action provides a means of setting the Volume to an absolute value.

Volume Inc

The VolumeInc action provides a means of increasing the Volume by 1.

Volume Dec

The VolumeDec action provides a means of decreasing the Volume by 1.

VolumeLimit

The VolumeLimit action reports the current VolumeLimit setting.

Balance

The Balance action reports the current Balance setting.

SetBalance

The SetBalance action provides a means of setting the Balance to a specific value.

BalanceInc

The BalanceInc action provides a means of increasing the Balance by 1.

BalanceDec

The BalanceDec action provides a means of decreasing the Balance by 1.

Fade

The Fade action reports the current Fade setting of the product.

SetFade

The SetFade action provides a means of setting the Fade to a specific value.

FadeInc

The FadeInc action provides a means of increasing the Fade by 1.

FadeDec

The FadeDec action provides a means of decreasing the Fade by 1.

Mute

The Mute action reports the current Mute state of the product.

SetMute

The SetMute action provides a means of setting the Mute state.

Characteristics

The Characteristics action returns all six characteristic values of the product.


State Variables

Volume

the current user volume setting, i.e. an integer value in the range [0..VolumeLimit]

Mute

the boolean setting indicating whether all output channels are currently forced to zero volume

Balance

the current setting of bias between left and right output channels, i.e. an integer value in the range [-BalanceMax..+BalanceMax]

Fade

the current setting of bias between front and back output channels, i.e. an integer value in the range [-FadeMax..+FadeMax]

VolumeLimit

the user-imposed (soft) maximum volume setting, i.e. an integer in the range [0..VolumeMax]; read-only

VolumeMax

the system-imposed (hard) maximum volume setting; read-only

VolumeUnity

the system-specific volume setting that results in the input signal amplitude equalling the output signal amplitude (0dB gain), i.e. an integer in the range [0..VolumeMax]; read-only

VolumeSteps

the system-specific number of user-visible volume steps that would increase the volume from zero to VolumeMax; read-only

VolumeMilliDbPerStep

the system-specific gain increase with each volume step in binary milli decibel (mibi dB); read-only

BalanceMax

the system-specific balance value that leads to maximum bias towards the right between output channels; read-only

FadeMax

the system-specific fade value that leads to maximum bias towards the rear between output channels; read-only

Technical Details

   Domain  : av.openhome.org
   Name    : Volume
   Version : 1

Volume Service Description (XML)

<?xml version="1.0" encoding="utf-8"?>
<scpd xmlns="urn:schemas-upnp-org:service-1-0">
   <specVersion>
      <major>1</major>
      <minor>0</minor>
   </specVersion>
   <actionList>
      <action>
         <name>Characteristics</name>
         <argumentList>
                <argument>
                    <name>VolumeMax</name>
                    <direction>out</direction>
                    <relatedStateVariable>VolumeMax</relatedStateVariable>
                </argument>
                <argument>
                    <name>VolumeUnity</name>
                    <direction>out</direction>
                    <relatedStateVariable>VolumeUnity</relatedStateVariable>
                </argument>
                <argument>
                    <name>VolumeSteps</name>
                    <direction>out</direction>
                    <relatedStateVariable>VolumeSteps</relatedStateVariable>
                </argument>
                <argument>
                    <name>VolumeMilliDbPerStep</name>
                    <direction>out</direction>
                    <relatedStateVariable>VolumeMilliDbPerStep</relatedStateVariable>
                </argument>
                <argument>
                    <name>BalanceMax</name>
                    <direction>out</direction>
                    <relatedStateVariable>BalanceMax</relatedStateVariable>
                </argument>
                <argument>
                    <name>FadeMax</name>
                    <direction>out</direction>
                    <relatedStateVariable>FadeMax</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
      <action>
         <name>SetVolume</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>in</direction>
                    <relatedStateVariable>Volume</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
      <action>
         <name>VolumeInc</name>
      </action>
      <action>
         <name>VolumeDec</name>
      </action>
      <action>
         <name>Volume</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>out</direction>
                    <relatedStateVariable>Volume</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
      <action>
         <name>SetBalance</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>in</direction>
                    <relatedStateVariable>Balance</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
      <action>
         <name>BalanceInc</name>
      </action>
      <action>
         <name>BalanceDec</name>
      </action>
      <action>
         <name>Balance</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>out</direction>
                    <relatedStateVariable>Balance</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
 
      <action>
         <name>SetFade</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>in</direction>
                    <relatedStateVariable>Fade</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
      <action>
         <name>FadeInc</name>
      </action>
      <action>
         <name>FadeDec</name>
      </action>
      <action>
         <name>Fade</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>out</direction>
                    <relatedStateVariable>Fade</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
      <action>
         <name>SetMute</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>in</direction>
                    <relatedStateVariable>Mute</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
      <action>
         <name>Mute</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>out</direction>
                    <relatedStateVariable>Mute</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
      <action>
         <name>VolumeLimit</name>
         <argumentList>
                <argument>
                    <name>Value</name>
                    <direction>out</direction>
                    <relatedStateVariable>VolumeLimit</relatedStateVariable>
                </argument>
         </argumentList>
      </action>
   </actionList>
   <serviceStateTable>
      <stateVariable sendEvents="yes">
         <name>Volume</name>
         <dataType>ui4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>Mute</name>
         <dataType>boolean</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>Balance</name>
         <dataType>i4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>Fade</name>
         <dataType>i4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>VolumeLimit</name>
         <dataType>ui4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>VolumeMax</name>
         <dataType>ui4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>VolumeUnity</name>
         <dataType>ui4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>VolumeSteps</name>
         <dataType>ui4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>VolumeMilliDbPerStep</name>
         <dataType>ui4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>BalanceMax</name>
         <dataType>ui4</dataType>
      </stateVariable>
      <stateVariable sendEvents="yes">
         <name>FadeMax</name>
         <dataType>ui4</dataType>
      </stateVariable>
   </serviceStateTable>
</scpd>